Position EZArtScreenTM stencil |
Place the silkscreen shiny side down on the surface to be printed. If
necessary, secure the edges with masking tape. You can also
spray the shiny side with re-positionable spray adhesive. If you
spray from a distance of 1 to 2 feet with one quick squirt the
stencil won’t clog.
Apply a bead of paint along the top of the silkscreen on
the dull side. With a squeegee held at a 45 degree angle, stroke
the paint down the screen applying light pressure. If you miss
an area, remove the excess paint from the squeegee and place it
above the area and pull it down to fill in the gap.
Remove silkscreen |
Before removing the silkscreen, lift a small portion to make sure there are no voids on
the surface. Check the top and then the bottom. As long as you lift only a portion of the stencil,
it will automatically align itself.
Clean silkscreen |
Do not let water based paints dry on your screen. Keep a
container of water nearby to drop your stencil in as soon as
you’ve used it. Gently rinse your silkscreen under running water
while gently brushing the dull side with a natural sponge. Never
rub the shiny side.
Dry silkscreen |
Blot dry on the dull side and hang to dry.If silkscreens get stuck together, soak them in water until they come apart.